ITEM #0759880 0759881 LED SEMI-FLUSHMOUNT CEILING FIXTURE MODEL #SFL10-BNK SFL10-BZ Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date E5002223 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. AB15884 Lowes.
PACKAGE CONTENTS PART DESCRIPTION QUANTITY A Fixture 1 B Glass Shade 1 C Mounting Strap (preassembled to Fixture (A)) 1 D Screw (preassembled to Mounting Strap (C)) 2 E Decorative Nut (preassembled to Screw (D)) 2 F Threaded Rod 1 G Rubber Washer (preassembled to Threaded Rod (F)) Washer (preassembled to Threaded Rod (F)) Nut (preassembled to Threaded Rod (F)) 1 Finial Plate (preassembled to Threaded Rod (F)) 1 Finial (preassembled to Threaded Rod (F)) 1 H I J K A B C 1 D E
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to electrical shock, fire or other injuries that could be hazardous or even fatal. • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding.
SAFETY INFORMATION CAUTION • TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing the fuse (or switching the circuit breaker off). • If you are not sure the lighting system has a grounding means, DO NOT attempt to install this fixture. Contact a qualified, licensed electrician for information regarding the proper grounding methods as required by the local electrical code in your area.
ASSEMBLY INSTRUCTIONS 2. Remove existing fixture and disconnect all electrical wiring. 2 Outlet Box 3. Attach mounting strap (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding. 3 Outlet Box Tighten machine screws (BB) to secure mounting strap (C) to outlet box.
ASSEMBLY INSTRUCTIONS 4. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA). Connect BARE/GREEN ground wire from outlet box to BARE ground wire from fixture (A) using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 5. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. 5 Outlet Box WARNING: Make sure no bare wire or wire strands are visible after making connections. AA AA Carefully arrange excess wiring and wire connectors (AA) within outlet box. AA A 6. Remove decorative nuts (E) from screws (D) on the mounting strap (C). Align holes on fixture (A) with screws (D) on mounting strap (C) and push up.
ASSEMBLY INSTRUCTIONS 8. Align hole in glass shade (B) with threaded rod (F) and push up gently on glass shade (B) until threaded rod (F) comes through hole in glass shade (B). Secure glass shade (B) with rubber washer (G), washer (H), nut (I), finial plate (J) and finial (K) previously removed (Step 7, Page 7). 8 A F CAUTION: Do not overtighten nut (I) or finial (K) as glass may crack or break. G H I J K 9. Restore power and test fixture (A).
TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Light does not come on initially or no longer comes on. 1. Power is OFF. 2. Faulty connection. 3. LED component is not working properly. 1. Make sure power supply is ON. 2. Check wiring and all connections. 3. Contact customer service. Fuse blows out or circuit breaker trips. 1. Crossed wires. 2. Power wire is grounding out. 1. Check wiring. 2.
