Installation Guide

2
TABLE OF CONTENTS
Français p. XX
Español p. XX
1
Français p. 10
Español p. 19
ASSEMBLY INSTRUCTIONS
9
7
5
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Friday.
Serial Number
Purchase Date
BM19153
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................4
Safety Information. .........................................................................................................................4
Preparation ....................................................................................................................................4
Assembly or Installation Instructions .............................................................................................5
You may also contact us anytime at www.lowes.com
ATTACH YOUR RECEIPT HERE
Page 1
Page 2 Page 3
Page 4
Page 5
Page 6
Page 7
Page 8 Page 9
4
6
8
ITEM #1341840
MODEL #JQY8115A-2
5-LIGHT CHANDELIER
PACKAGE CONTENTS
3
A Mounting Strip
E Canopy
G Chain
H Center Column
I Fixture Body
J Glass Shade
1
1
1
1
1
2
1
1
1
5
5
5
B
D
E
A
C
F
F
G
H
J
I
K
L
B Threaded Tube (preassembled to Mounting Strip (A))
C Screw Collar Loop (preassembled to Threaded Tube (B))
D Nut (preassembled to Screw Collar Loop (C))
F K/D Ring (preassembled to Chain (G))
QUANTITYDESCRIPTIONPART
K Metal Ring (preassembled to Fixture Body (I))
L Socket Ring (preassembled to Fixture Body (I))
HARDWARE CONTENTS (shown actual size)
Qty. 2 Qty. 3
AA BB
Outlet Box Screw Wire Connector
2
3
1
I
H
I
1. Turn off power at circuit breaker or fuse panel.
Remove old fixture. Disconnect wiring.
2.
Adjust arms of fixture body (I) evenly.
3. Screw center column (H) onto fixture body (I).
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
12. Install light bulbs (not included). Use
60-watt max. standard-base incandescent
bulbs or CFL/LED equivalents.
7.
Attach one K/D ring (F) to the loop on center column
(H), and the other one through the nut (D), through
canopy (E), and onto the screw collar loop (C).
Then, screw the K/D rings (F) until the chain (G) is
firmly secured.
8.
Weave electrical wires and ground wire up chain
(G), through nut (D), through canopy (E), through
the screw collar loop (C), through threaded tube
(B), and into outlet box.
9.
Strip 3/4 in. of insulation from wire end. Twist stripped
ends of the white, ribbed or tinned wire without writing
from the fixture evenly against the white wire from the
outlet box. Connect the black, smooth or un-tinned
wire with writing from the fixture to the black wire from
the outlet box in the same manner. Snip ends.
Attach copper wire to ground wire.
Helpful hint: If the outlet box doesn’t have a ground
wire, you can attach the ground wire from the fixture
directly to the green screw preassembled on the
mounting strip (A).
Attach wire connectors (BB) to ends. Tape wire
connectors (BB) and wires together with electrical
tape (not included).
7
F
E
C
H
D
G
G
C
E
B
D
8
10.
Tighten the nut (D) onto screw collar loop (C) to
secure canopy (E) in place.
10
D
C
E
11.
Unscrew socket rings (L), remove the metal rings (K)
from sockets on fixture body (I).
Attach glass shades (J) over the sockets. Place the
metal rings (K) and tighten the socket rings (L) until
the glass shades (J) are firmly secured to the fixture
body (I).
Note: Do not overtighten.
12
J
I
K
L
11
K
L
Hardware Used
x 3
Wire Connector
ASSEMBLY INSTRUCTIONS
Unscrew nut (D) from screw collar loop (C).
Unscrew the threaded tube (B) almost out of
mounting strip (A) to get enough length to attach
the screw collar loop (C) and nut (D) on it to
hold canopy (E) in place.
Note: Do not install canopy (E) yet.
4.
5. Attach mounting strip (A) to outlet box (not
included) using outlet box screws (AA).
Hardware Used
Outlet Box Screw
AA
x 2
B
A
D
C
6.
Unscrew the K/D rings (F) from chain (G).
Adjust chain (G) to desired length. Spread the chain
link using standard pliers (not included) and screw
driver (not included) and twist chain link in opposite
direction and remove the extra chain lengths.
Note: Wrap soft cloth (not included) around pliers
and screw driver to protect the chain's finish.
6
G
F
AA
5
3
A
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-389-8827, 8 a.m. - 6 p.m.,
EST, Monday -Thursday, 8 a.m. - 5 p.m., EST, Friday.
CARE AND MAINTENANCE
• Shut off main power before cleaning light with damp cloth or window cleaner. Do not use
abrasive cleansers.
TROUBLESHOOTING
Mounting Strip 1341840-A
1341840-B
1341840-C
1341840-D
1341840-AA
1341840-AA
Threaded Tube
Screw Collar Loop
PART PART#DESCRIPTION
Nut
B
AA
BB
D
A
C
Outlet Box Screw
Wire Connector
A
B
C
D
AA
BB
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
CAUTION
WARNING
• Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear
gloves when handling the parts.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Use flashlight or alternate light source to light work area during installation.
• Assistance may be required to support fixture during installation.
• Workable for dimming circuits when using appropriate light bulbs with dimmable function.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 20-30 minutes
PREPARATION
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Wire cutters, Electrical tape, Safety goggles, Step ladder.
Helpful Tools (not included): Wire strippers.
Care and Maintenance ...................................................................................................................9
Troubleshooting .............................................................................................................................9
Warranty ........................................................................................................................................9
Replacement Parts List ................................................................................................................ . 9
WARRANTY
Bulb will not light.
PROBLEM
1. Bulb is burned out.
POSSIBLE CAUSE
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
Fuse blows or circuit breaker
trips when light is turned on.
Crossed wires or power wire
is grounding out.
Check wire connections.
4. Test or replace switch.
3. Check wiring.
2. Make sure power supply is on.
1. Replace light bulb.
CORRECTIVE ACTION
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship
for one (1) year from the date of purchase. lf within this period the product is found to be defective
in material or workmanship, the product must be returned, with a copy of the original sales receipt
as proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its
option, repair, replace or refund the original purchase price to the consumer. This warranty does
not cover fixtures becoming defective due to misuse, accidental damage, improper handling
and/or installation and specifically excludes liability for direct, incidental or consequential
damages. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply to you. This warranty gives you specific legal rights. You
may have other rights that vary from state to state.
BB
Project Source is a registered trademark of
LF, LLC. All rights reserved.
TM
9
A
BB