Installation Guide

5
1
2
2
2
4
6
5
ASSEMBLY INSTRUCTIONS
4. From underneath sink, replace rubber spacer (E)
and metal spacer (F), tighten with lock nut (G).
Note: The slotted space must face rear of sink.
E
B
J
D
C
D
F
A
G
G
1
5. Remove pre-assembled guide washer (D), metal
washer (C) and rubber washer (B) from shanks of
hot handle (A) and cold handle (J).
6. Unscrew the pre-assembled screws on guide
washer (D) until they are flush with the face of the
washer.