Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Cap nut
Mounting screw
Machine screw
Crossbar
x 2
x 2
x 2
x 1
x 3
x 2
x 2
3. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
Wire nut
Cap nut
Mounting screw
B
AA
B
CC
B
B
DD
EE
B
B
BB
AA
BB
ASSEMBLY INSTRUCTIONS
4
5
6
6. Install light bulbs (not included). Use only
60-watt or less standard-base bulbs.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
EE
AA
DD
A
B
C
CC
CC
4 5
B
CC
1. Remove cap nuts (AA) from mounting screws (CC)
preassembled to crossbar (EE). Attach crossbar
(EE) to the outlet box (not included) with machine
screws (DD). Note: The mounting screws (CC)
should protrude away from the outlet box.
4. Place xture (A) onto mounting screws (CC).
Secure with cap nuts (AA). Note: Fixture (A) can
be installed with the sockets facing either up or
down.
5. Remove socket rings (C). Install glass shades (B)
over sockets of xture (A), then secure with socket
rings (C).
AA
A
Lowes.com Lowes.com