Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Mounting screw
Machine screw
Machine screw
Mounting bracket
x 2
x 2
x 1
x 3
x 2
1. Tighten the machine screws (CC) two
full turns into the holes in the mounting
bracket (DD). Then fasten mounting bracket
(DD) onto the ceiling outlet box (not included)
using mounting screws (BB).
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
Wire nut
B
BB
B
B
CC
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5. Install light bulbs (not included). Use one 60-watt
max. standard-base bulbs or one 13-watt standard-
base CFL bulbs.
5
6
4. Remove cap (D), nut (C) and glass shade (B)
from the xture (A). Place the xture (A) over
the outlet box. Allow heads of machine
screws (CC) to come out through the large
ends of the keyholes. Twist xture (A) until
heads of machine screws (CC) slide into narrow
ends of keyholes. Tighten machine screws (CC)
to secure xture (A).
6. Place the glass shade (B) onto the xture (A),
then secure with nut (C) and cap (D).
Repeat steps 1 - 6 for all remaining xtures.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
CC
A
A
B
C
D
4 5
B
CC
or
DD
BB
CC
Lowes.com Lowes.com