Installation Guide

4
5
6
ASSEMBLY INSTRUCTIONS
5
4. Place ceiling plate (A) onto long mounting
screws (CC). Place the spring on the lamp
holder (B) into the center hole on the ceiling
plate (A).
Hardware Used
CC
x 2
Long mounting screw
5. Place the ceiling plate (A) over the outlet box.
Both heads of the long mounting screws (CC)
are to come out through the large ends of the
key holes. Twist the ceiling plate (A) until
heads of long mounting screws (CC) slide
into narrow ends of key holes. Fully tighten
long mounting screws (CC) to secure the
ceiling plate (A).
6. Install light bulbs (not included). Use only
60-watt or less standard-base bulbs or
13-watt standard-base CFL bulbs.
A
B
CC
A
Lowes.com
or