Installation Guide

1
2
3
ASSEMBLY INSTRUCTIONS
4
1. Attach the mounting bar (DD) by tightening
the short mounting screws (BB) securely
into the outlet box (not included). Attach the
long mounting screws (CC) into the mounting
bar (DD).
Hardware Used
BB
x 2
Short mounting screw
Hardware Used
AA
x 3
Wire nut
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers
(not
included)
, black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
A
CC
x 2
Long mounting screw
DD
x 1
Mounting bar
AA
DD
BB
CC
Lowes.com