Installation Guide

HARDWARE CONTENTS (shown actual size)
SAFETY INFORMATION
3
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning
installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
CAUTION
• CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
• If in doubt about electrical installation, consult a licensed electrician.
Mounting bar
(Not actual size)
Qty. 1
Wire nut
Qty. 3
Short
mounting
screw
Qty. 2
AA
DD
CC
BB
Long
mounting
screw
Qty. 2
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
EE
Closed finial
Qty. 1
FF
Cotton thread
(Not actual size)
Qty. 1
Lowes.com