Installation Guide

5
4
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
1
2
3
Short mounting screw
Long mounting screw
Mounting bracket
x 2
x 2
x 1
x 3
1. Tighten the long mounting screws (CC) 2 full
turns into the holes in the mounting bracket (DD).
Then fasten mounting bracket (DD) onto the
ceiling outlet box (not included) using short
mounting screws (BB).
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
Wire nut
B
BB
B
CC
B
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5. Install light bulbs (not included). Use only
60-watt or less standard-base bulbs.
5
6
4. Place the xture (A) over the outlet box. Allow
heads of long mounting screws (CC) to come
out through the large ends of the key holes.
Twist xture (A) until heads of long mounting
screws (CC) slide into narrow end of key holes.
Tighten long mounting screws (CC) to secure
xture (A).
6. Tighten the threaded nipple (B) into the
xture (A). Place the washer (C), rubber
ring (D), and glass shade (E) onto the threaded
nipple (B). Tighten with nut (F) and place the
cap (G) onto the threaded nipple (B). Tighten
with knob (H).
Lowes.com Lowes.com
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
DD
BB
CC
A
A
B
A
C
H
F
E
D
G