Installation Guide

5
4
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
1
2
3
Short mounting screw
Long mounting screw
Mounting bracket
x 2
x 2
x 1
x 3
1. Tighten the long mounting screws (CC) 2 full
turns into the holes in the mounting bracket (DD).
Then fasten mounting bracket (DD) onto the
ceiling outlet box (not included) using short
mounting screws (BB).
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together with electrical tape (not
included).
Wire nut
B
BB
B
CC
B
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5. Install light bulb (not included). Use one 60-watt
max. standard-base bulb or one 13-watt standard-
base CFL bulb.
5
6
4. Place the xture (A) over the outlet box. Allow
heads of long mounting screws (CC) to come
out through the large ends of the key holes.
Twist xture (A) until heads of long mounting
screws (CC) slide into narrow end of key holes.
Tighten long mounting screws (CC) to secure
xture (A).
6. To install glass shade (B), rst push one side of
shade into xture (A), then push in the other side.
B
A
Lowes.com Lowes.com
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
DD
BB
CC
CC
A
Hardware Used
x 2
Long mounting screw
B
CC