Installation Guide

ASSEMBLY INSTRUCTIONS
1
2
3
AA
4
1.
Tighten the short mounting screws (CC) 2 full
turns into the holes in the mounting bracket
(DD). Then fasten mounting bracket (DD)
onto the ceiling outlet box (not included) using
long mounting screws (BB).
Hardware Used
CC
x 2
Short mounting screw
BB
x 2
Long mounting screw
DD
x 1
Mounting bracket
DD
BB
CC
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
Hardware Used
AA
x 3
Wire nut
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
ASSEMBLY INSTRUCTIONS
4
5
6
5
A
CC
4.
Place the fixture (A) over the outlet box. Allow
heads of short mounting screws (CC) to come
out through the large ends of the key holes.
Twist fixture (A) until heads of short mounting
screws (CC) slide into narrow end of key holes.
Tighten short mounting screws (CC) to secure
fixture (A).
Hardware Used
CC
Short mounting screw
x 2
B
H
E
D
G
A
C
F
6.
Tighten
the threaded nipple (B) into the
fixture (A). Place the washer (C), rubber
ring (D), and glass shade (E) onto the threaded
nipple (B). Tighten with nut (F) and place the
with knob (H).
Lowes.com
Lowes.com
5. Install light bulb (not included). Use one
60-watt max. standard-base bulb or one
13-watt standard-base CFL bulb.
cap (G) onto the threaded nipple (B). Tighten
or