Installation Guide

ASSEMBLY INSTRUCTIONS

Hardware Used

x 2

x 1

x 3

Short mounting screw

Long mounting screw

Mounting bracket

Wire nut

ASSEMBLY INSTRUCTIONS

3. Attach wire nuts (AA). Tape wire nuts (AA)

and wires together.

6. Install glass shade (B). Attach the glass shade

(B) to the xture (A) with the shade screw (C).

1. Tighten the long mounting screws (CC) 2 full

turns into the holes in the mounting bracket (DD).

Then fasten mounting bracket (DD) onto the

ceiling outlet box using short mounting screws (BB).

4. Place the xture (A) over the outlet box. Allow

heads of long mounting screws (CC) to come

out through the large ends of the key holes.

Twist xture (A) until heads of long mounting

screws (CC) slide into narrow end of key holes.

Tighten long mounting screws (CC) to secure

xture (A).

2. Strip 3/4 in. of insulation from wire ends.

Twist stripped ends together with pliers (not

included), black to black (power) and white to

white (neutral). Attach copper wire to ground

wire. Helpful hint: If necessary, attach copper

ground wire to grounded outlet box.

5. Install light bulb (not included). Use one 60-watt

max. standard-base bulb or one 13-watt standard-

base CFL bulb.

Lowes.com