Installation Guide

ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Mounting screw
Mounting bracket
Mounting bracket
Cap nut
Cap nut
x 4
x 2
x 2
x 2
x 2
x 6
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
Wire nut
B
BB
B
B
B
B
CC
CC
DD
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5
6
6. Install light bulbs (not included). Use two
40-watt max. candelabra-base bulb or two
7-watt max. candelabra-base CFL bulb.
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
CC
DD
A
A
B
C
F
D
E
G
H
I
BB
DD
CC
4 5
1. Remove cap nut (DD) from mounting bracket (CC).
Attach mounting bracket (CC) to the outlet box (not
included) with mounting screws (BB).
4. Remove knob (I), cap (H), nut (G), washer (B),
gasket (D) and rubber ring (E) from the threaded
nipple (C). Tighten the threaded nipple (C) into
the xture (A), then secure with washer (B) and
nut (G). Place the gasket (D), rubber ring (E) and
glass shade (F) onto the threaded nipple (C),
then secure with nut (G). Place cap (H) onto the
threaded nipple (C) and secure with knob (I).
5. Place xture (A) onto mounting bracket (CC), then
secure with cap nut (DD).
or
Lowes.com Lowes.com