ITEM #0434266 TUB AND SHOWER FAUCET MODEL #F201E510CP Français / Español p. 10 ATTACH YOUR RECEIPT HERE Serial Number ____________________________ Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B A F C D PART A B C D E F E DESCRIPTION Shower Arm Shower Arm Flange Showerhead Faucet Putty Plate (preassembled) Screen washer (preassembled) 1 HARDWARE CONTENTS AA BB Lock Nut x3 Thread Tape x1 QUANTITY 1 1 1 1 1 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Follow these installation instructions carefully. Proper installation is the installer’s responsibility. • Check local building codes before beginning installation to ensure compliance. • This product might require being installed with an automatic temperature compensating device to reduce the risk of scalding and thermal shock.
ASSEMBLY INSTRUCTIONS 1. Shut off main water supply before installation. 1 2. Place a bead of clear silicone sealant (not included) around the base of the putty plate (E). Install faucet through shower wall. 2 E 3. Install lock nuts (AA) onto threaded shanks of faucet (D) and hand tighten.
ASSEMBLY INSTRUCTIONS 4. Suggested installation: Attach a 1/2 in. female adapter with gasket (Slip x FIPT) (not included) to each threaded shank. Slip adapters over 1/2 in. water supply pipe using proper adhesive (not included) where applicable. 4 2 2 2 1 5. Install shower arm (A) and shower arm flange (B) to vertical shower pipe elbow (not included). 5 B 1 2 A 6. 6 Turn on main water supply.
OPERATING INSTRUCTIONS 1 Turn on water and lift shower diverter. Check for leaks at shower arm (A). A 1 1 1. 3 2 2. 3 2 2 Install showerhead (C) to shower arm (A). Hand tighten shower head. A 1 C 2 GENTLY CLEAN THE SCREEN WASHER Use a clean strap wrench to remove the shower head (C) from shower arm (A). 1 A 2 C 1 1.
GENTLY CLEAN THE SCREEN WASHER 2. Use a flathead screwdriver (not included) to carefully remove the screen washer (F). 2 F 3. 3 Gently clean the screen washer (F) with a toothbrush (not included). F 4 Reinstall the screen washer (F) and showerhead (C). Hand tighten shower head. A 2 4.
CARE AND MAINTENANCE • Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Leak from under handle. Retainer nut has come loose. O-ring on cartridge is dirty or damaged. Tighten the retainer nut. Clean or replace O-ring. Water will not shut off completely. Rubber valve seat is dirty or broken. Turn off water supply.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday. 2. 1. 3. 7. 5. 4. 6.
