ITEM #0434265 TUB AND SHOWER FAUCET MODEL #F201E509CP Français / Español p. 14 Pro jec tS ourc e ATTACH YOUR RECEIPT HERE Serial Number ____________________________ Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B A M D C E F G I H K L J PART A B C D E F G H I J K L M DESCRIPTION Shower Arm Shower Arm Flange Shower Head Valve Body Handle Escutcheon Supply Insert with O-ring Handle Cap Supply Nut Spout Screw (preassembled to Handle (E)) Plug Screen washer (preassembled) 2 QUANTITY 1 1 1 1 2 2 2 2 2 1 2 1 1
HARDWARE CONTENTS AA Thread Seal Tape x1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday. WARNING • Follow these installation instructions carefully. Proper installation is the installer’s responsibility. • Check local building codes before beginning installation to ensure compliance.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Note: This guide is a general representation of the installation process. In the case of plumbing products, every installation is essentially a custom installation and some adjustments may be required for your specific application.
ASSEMBLY INSTRUCTIONS Note: Numbered arrows within steps indicate sequence of actions. 1 1. Shut off main water supply before installation. 2. Remove supply nut (I) and supply insert with O-ring (G) from valve body (D). Attach supply nut (I) and supply insert with O-ring (G) onto hot and cold supply lines (not included). Note: Use thread seal tape (AA) on all pipe threads. 2 G 3 2 I 2 1 Thread seal tape 1 AA 3.
ASSEMBLY INSTRUCTIONS 4. Attach vertical shower pipe to the top of the middle elbow of valve body (D). Thread seal tape 4 1 AA D 2 2 5. Attach vertical tub pipe to the bottom of the middle elbow of valve body (D). Note: Recommend 8 in. minimum distance to spout. For shower only installation attach plug (L) to the bottom of the middle elbow of valve body (D) using thread seal tape. 5 D 1 Thread seal tape 23 6. Install stub-out pipe (not included) for spout (J).
ASSEMBLY INSTRUCTIONS 7. Install shower arm (A) and shower arm flange (B) to vertical shower pipe elbow. 7 B 1 2 A Thread seal tape AA 8. Install escutcheons (F) and handles (E) to valve body (D). Replace screws (K) and install handle caps (H). 8 D F 1 K x2 E x2 H 3 2 x2 9. Turn on main water supply.
ASSEMBLY INSTRUCTIONS ITEM #0434265 10. Check for leaks at tub stub-out pipe. Next wrap stub-out pipe with thread seal tape and install spout (J). 10 TUB AND SHOWER FAUCET MODEL #F201E509CP 1 Français / Español p. 14 2 J Thread seal tape 2 AA 11 11. Check for leaks at shower arm (A). Next divert water to the shower to flush out the water lines. A Pro jec tS ourc e 12. Install shower head (C) to shower arm (A). Hand tighten shower head.
REPAIR INSTRUCTIONS IN CASE OF LOW FLOW FROM SHOWER HEAD 1. Use a clean strap wrench (not included) to remove the shower head (C) from shower arm (A). 1 A 2 1 C 2. 2 Use a flathead screwdriver (not included) to carefully remove the screen washer (M). M 3. 3 Gently clean the screen washer (M) with a toothbrush (not included).
REPAIR INSTRUCTIONS 4. Reinstall the screen washer (M) and shower head (C). Hand tighten shower head. 4 2 A M C 1 IN CASE OF FAUCET CONTINUALLY DRIPPING To order a replacement shower cartridge repair kit, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday. 1. 41 Locate and shut off main water supply in your house. Turn on the shower valve to drain the remaining water in the shower valve. Remove the sleeve, stem extension, cartridge, rubber seat and spring.
OPERATION INSTRUCTIONS NOISE AND WATER HAMMER IN PEX SYSTEMS As with all plumbing materials under some operating conditions, water hammer can occur in PEX plumbing systems. The inherent flexibility of PEX drastically reduces the magnitude of pressure surges compared with metallic plumbing materials. Damage to plumbing components in a PEX system due to these pressure surges is highly unlikely, although noise can sometimes result. Fortunately, there are solutions to minimize or eliminate water hammer noise.
WARRANTY ITEM #0434265 The manufacturer warrants this faucet to be free from defects in workmanship and material present at time of shipment from the factory for a limited lifetime from the date of purchase. This warranty applies only to the original purchaser. The manufacturer agrees to correct such defects at no charge or, at our option, replace the faucet with a comparable or superior model.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday. 3. 10 . 2. 9. 14. 11. 8. 1. 7. 12.. 6. 5. 13. 4.1 4.2 PART 1 2 3 4.1 4.
