Installation Guide

6
ASSEMBLY INSTRUCTIONS
Attach vertical shower pipe to the top of the
middle elbow of valve body (D).
Attach vertical tub pipe to the bottom of the
middle elbow of valve body (D).
Note: Recommend 8 in. minimum distance to spout.
For shower only installation attach plug (L) to the
bottom of the middle elbow of valve body (D) using
thread seal tape.
4.
5.
1
D
1
D
3
2
2
2
Install stub-out pipe (not included) for spout
(J). Use proper length stub-out pipe so pipe
threads will extend 3-3/4 to 4 inches beyond
nished wall.
6.
1
1
3-3/4 in.
2
Thread seal tape
Thread seal tape
5
4
Thread seal tape
6
AA
AA
AA