Installation Guide

ASSEMBLY INSTRUCTIONS
2. Insert the bulb socket back into the track head (A) and
secure with the bulb clip (C).
4
1. Pull the bulb socket from the track head (A). Insert
the bulb (B) into the bulb socket.
1
A
B
3
2
A
C
A
3. Identify ground side on the track head (A)
connector and track section (sold seperately).
Push the top portion of the track head (A)
connector into the slot of the track section.
Pull down the connector’s locking tab. Twist
ground side of the track head (A) connector
toward the ground side the track section until
the track head (A) connector snaps into place.
NOTE: The ground side of the track head (A)
connector is the side with two metal tabs. The
ground side of the track section has an indented
groove on the face and two internal copper
strips. The track head (A) can only be assembled
if the ground sides of the track head (A) connector
and the track section are aligned.
GROUND
TAB
GROUND GROOVE
GROUND SIDE OF
CONNECTOR
Lowes.com