Installation Guide

● Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off

or removing the fuse from the fuse box.

● To clean the fixture, use a dry or slightly dampened clean cloth.

● DO NOT uses any cleaners with chemicals, solvents, or harsh abrasives as damage to the fixture

may occur.

● DO NOT touch new bulb with bare hands as oil from skin may damage the lamp and cause short

bulb life.

● Bulb replacement: Use 75-watt max., 120-volt R30- or PAR30-base bulbs.

The manufacturer warrants this lighting fixture against defects in materials and workmanship for a

period of one year from the date of purchase. If within this period the product is found to be defective

in material or workmanship, the product must be returned, with a copy of the bill of sale as proof of

purchase, to the original place of purchase. The manufacturer will, at its option, repair, replace or

refund the purchase price to the original purchaser consumer. This warranty does not cover light

bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling and/or

installation and specifically excludes liability for direct, incidental or consequential damages. As some

states do not allow exclusions or limitations on an implied warranty, the above exclusions and

limitations may not apply. This warranty gives you specific rights and you may also have other rights

that vary from state to state.

Printed in China

WARRANTY

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE CORRECTIVE ACTION

Light bulb will not illuminate.

1. Light bulb is burned out.

2. Power is off.

3. Incorrect wiring.

4. Faulty light switch.

5. Connector or track head

may be installed improperly.

1. Replace light bulb.

2. Make sure power supply

is on.

3. Check wiring connection at

power source and at track

power feed.

4. Test or replace light switch.

5. Check the connections for

proper installation.

Blown fuse or tripped circuit

breaker when fixture is

turned on.

1. Incorrect wiring. 1. Check wiring connection at

power source and at track

power feed.

CARE AND MAINTENANCE

Lowes.com