Installation Guide

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 5 minutes.
No Tools Required for Assembly.
Helpful Tools (not included): Ladder, Gloves.
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
● Save these instructions and refer to them when additions to or changes in the track configuration
are made.
● Do not install this lighting system in a damp or wet location.
● Before energizing, make sure the lighting system is clear of all material that could cause a
direct short and check all electrical connections to make sure they are tight.
● Do not install any part of this system less than 7 feet above the floor.
●
● Disconnect electrical power before adding to or changing the configuration of the track.
● Do not attempt to energize anything other than lighting track fixtures on the track.
● To reduce the risk of fire and electrical shock, do not attempt to connect power tools, extension
cords, appliances, and the like to the track.
● Do not touch lamp at any time. Turn off power and allow bulbs to cool down before replacing.
● To reduce the risk of a burn during re-lamping, remove the track head from the track before
re-lamping. Do not touch hot lens, guard or enclosure.
CAUTION
●
● Use a soft cloth, gloves to change bulbs. Oil from skin may damage the bulb.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For use with Jubilant EC series line voltage track systems only.
LIGHTED LAMP IS HOT! Do not install any lamps closer than 6 in. from any curtain or similar
combustible material.
Lowes.com