Installation Guide

GROUND
TAB
GROUND GROOVE
GROUND SIDE OF
CONNECTOR
4. Identify ground side on the track head (A)
connector and track section (sold seperately).
Push the top portion of the track head (A)
connector into the slot of the track section.
Pull down the connector’s locking tab. Twist
ground side of the track head (A) connector
toward the ground side the track section
until the track head (A) connector snaps into place.
NOTE: The ground side of the track head (A)
connector is the side with two metal tabs. The
ground side of the track section has an indented
groove on the face and two internal copper
strips. The track head (A) can only be
assembled if the ground sides of the track
head (A) connector and the track section
are aligned.
4
A
5
A
5. To remove the track head (A) from the track
section, first allow the track head (A) to cool
down. Pull down on the track head (A)
connector’s locking tab, and twist until the
track head (A) disengages.
5
Lowes.com