Installation Guide

a. For toggle bolt installation, drill a 5/8 in. hole at

each mark on ceiling. Insert toggle bolts (AA)

through the track section (F) and thread 1/2 in.

toggle onto bolts. Place track section (F) against

the ceiling and insert toggle bolts (AA) into holes

until they spring open; tighten bolts.

4. Place the linear track section (F) in the desired location on the mounting plate (B) between the

two track mounting screws (A). Mark the location of the track on the ceiling with a pencil (not

included) through the mounting holes in the bottom of the track section (F). Attach the track

section (F) to the desired location on the ceiling in one of the following ways:

Hardware Used

x 2

Toggle Bolts

3. Align holes in the mounting plate (B) with holes in

the outlet box. Secure mounting plate (B) to

outlet box with machine screws (EE).

Hardware Used

Outlet Box

x 2

Machine Screw

Lowes.com