Installation Guide

7
ASSEMBLY INSTRUCTIONS
Lowes.com
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
7.
7
8.
8
Align keyslot holes on fixture (A) with fixture
screws (BB) and push up. Secure fixture (A) to
mounting strap (C) by tightening the fixture
screws (BB).
9.
9
Restore power and test fixtures (A).
If fixtures do not function, please refer to
TROUBLESHOOTING on next page.
x 2
Hardware Used
Fixture Screw
BB
Align three tabs on shade (B) with three slots on
fixture (A) and twist shade (B) to the right
(clockwise) until it stops.
Repeat Steps 3 - 9 to install second fixture.
B
A
A
C
Outlet Box
BB
BB
Outlet Box
AA
AA
AA