Installation Guide

6
ASSEMBLY INSTRUCTIONS
Prepare wires by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included). Connect
WHITE wire from fixture (A) to WHITE wire from
outlet box using existing wire connector or wire
connector (AA).
Connect BLACK wire from fixture (A) to BLACK wire
from outlet box using existing wire connector or wire
connector (AA).
Connect BARE/GREEN ground wire from outlet box
to GREEN ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to WHITE
or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your house
wire is larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper size
wire connectors to use.
5.
x 3
Hardware Used
Wire Connector
AA
5
BARE/
GREEN
Outlet Box
A
AA
WHITE
BLACK
AA
AA
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
6.
6
Outlet Box
AA
AA
AA