Installation Guide

8
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
9.
Restore power and test fixtures (A).
If fixtures (A) do not function, please refer
to the TROUBLESHOOTING guide on the
next page.
A
9
Lowes.com
8.
Align hole in glass shade (B) with threaded
rod (E) and push up gently on glass shade
(B) until threaded rod (E) comes through
hole in glass shade (B). Secure glass
shade (B) with nut (F) previously removed
(Step 7, Page 7), then finial (CC).
CAUTION: Do not overtighten nut (F) or
finial (CC) as glass may crack or break.
Repeat Steps 3 - 8 to install second fixture.
8
A
E
CC
B
F
A
• Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass.
Do not use an abrasive cleaner on glass or fixture.
• Total wattage for each fixture is 17 watts; do not attempt to replace the LEDs.
Hardware Used
Finial
x 1
CC