Installation Guide

7
ASSEMBLY INSTRUCTIONS
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
6.
6
7.
7
Align keyslot holes on fixture (A) with fixture
screws (D) on mounting strap (C) and push up.
Secure fixture (A) to mounting strap (C) by
tightening the fixture screws (D).
8.
Restore power and test fixtures (A).
If fixtures do not function, please refer to
TROUBLESHOOTING on next page.
Align three tabs on shade (B) with three slots on
fixture (A) and twist shade (B) to the right
(clockwise) until it stops.
Repeat Steps 3 - 8 to install second fixture.
B
A
8
Outlet Box
AA
AA
AA
A
C
Outlet Box
D
D