Installation Guide

BB
BB
C
6
ASSEMBLY INSTRUCTIONS
Prepare wires by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included). Connect
WHITE wire from fixture (A) to WHITE wire from
outlet box using existing wire connector or wire
connector (AA).
Connect BLACK wire from fixture (A) to BLACK wire
from outlet box using existing wire connector or wire
connector (AA).
Connect BARE/GREEN ground wire from outlet box
to GREEN ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to WHITE
or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your house
wire is larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper size
wire connectors to use.
5.
x 3
Hardware Used
Wire Connector
AA
5
4
4.
Attach mounting strap (C) to outlet box (not included)
using existing washers and outlet box screws or the
machine screws (BB). NOTE: If the outlet box screws
required for your outlet box are of a different size
than the machine screws (BB), consult a licensed
electrician before proceeding. Tighten machine
screws (BB) to secure mounting strap (C).
CAUTION: Make sure the outlet box can support
35 lbs. hanging weight. Use metal outlet box; plastic
outlet boxes are not recommended.
Hardware Used
Machine Screw
x 2
BB
BARE/
GREEN
Outlet Box
A
AA
WHITE
BLACK
AA
AA