Installation Guide

• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by

removing the fuse (or switching the circuit breaker off).

• If you are not sure the lighting system has a grounding means, DO NOT attempt to install this

fixture. Contact a qualified, licensed electrician for information regarding the proper grounding

methods as required by the local electrical code in your area.

• All fixtures must be mounted to an outlet box that is supported by the building structure.

• If a dimmer control switch is used with this fixture, obtain professional advice to determine the

correct type to use as well as the electrical rating required.

• Do NOT tamper with or attempt to repair LED component of fixture. The light source is designed for

this specific application and should not be serviced by untrained personnel. If any servicing is

required, call our customer service department.

CAUTION

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Assembly Time: 15 minutes (per fixture)

Tools Required for Assembly (not included): Flathead Screwdriver, Phillips Screwdriver, Wire

Strippers, Pliers, Wire Cutters, Safety Glasses, Stepladder, Electrical Tape

Helpful Tools (not included): A/C Tester Light, Do-It-Yourself Guide, Soft Cloth

NOTE: Dimmable to 10% with select dimmers. See Lowes.com for more information.

SAFETY INFORMATION