Installation Guide

1
2
3
ASSEMBLY INSTRUCTIONS
4
1. Tighten the short mounting screws (CC) two
full turns into the holes in the mounting
bracket (DD). Then fasten mounting bracket
(DD) onto the ceiling outlet box (not included)
using long mounting screws (BB).
Hardware Used
Hardware Used
AA
x 3
Wire nut
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded junction box.
3. Attach wire nuts (AA). Tape wire nuts (AA)
and wires together.
A
CC
x 2
Short mounting screw
BB
x 2
Long mounting screw
DD
x 1
Mounting bracket
AA
DD
BB
CC
Lowes.com