Installation Guide

7
Lowes.com
®
ASSEMBLY INSTRUCTIONS
8. Check for leaks:
a. Turn on the hot and cold water supply lines and
allow the water to from the outlets until all
foreign matter has been out of the line. Run
hot and then cold for one minute each.
b. Check for leaks.
c. Shut off the water at the faucet and supply lines.
8
9. Install the showerhead (C) to the end of the shower arm
(B) by twisting in a clockwise direction. Tighten with a
wrench. To avoid damage to the place a cloth
between the wrench and showerhead.
9
B
C
CARE AND MAINTENANCE
 Clean carefully by gently wiping with a grit-free damp cloth.
 Use only mild soap with water.
 Never use acids, harsh chemicals, or abrasive detergents to clean the surface.