Installation Guide

5
Lowes.com
®
ASSEMBLY INSTRUCTIONS
3. Install the valve body (D):
a. Wrap thread sealant tape (not included) around
the pipe threads in a clockwise direction.
b. Connect the water supplies (3) (not included), the
shower outlet pipe (2) (not included) and the tub
outlet pipe (1) (not included) to the valve body
(D) in a clockwise direction. Tighten the pipes to
the valve body with a pipe wrench (not included).
Connect the pipe elbows (4) (not included)
to the end of the shower outlet and tub outlet
pipes. Connect the tub spout outlet pipe (5) (not
included) to the lower pipe elbow (not included).
Tighten the elbows (not included) and tub spout
outlet pipe (not included) connections with a pipe
wrench (not included).
3
4
3
1
3
5
2
2
4
D
4. Install the shower arm (B):
a. Insert the long end of the shower arm (B) through
the shower arm
(A) and wrap thread
sealant tape (not included) to both sides of the
shower arm (B).
b. Thread the long end of the shower arm (B) into the
pipe elbow inside the wall in a clockwise direction.
c. Carefully tighten the shower arm (B) with a
wrench. Do not overtighten as it could do damage
to the shower arm (B).
4
B
A