Installation Guide

5
Lowes.com
ASSEMBLY INSTRUCTIONS
5. Remove the stopper (D) and the
(E) from the
pop-up body (H). Screw the nut (G) all the way down
onto the pop-up body (H) and then push the gasket (F)
down.
5
D
F
E
G
H
6. Apply silicone sealant (not included) to the underside of
the
(E).
6
E
7. Insert the pop-up body (H) into the sink and screw the
(E) onto the pop-up body (H). Ensure the pivot
hole is facing the back of the sink. Tighten the nut (G)
and remove the pivot nut (I).
7
E
H
G
I