Installation Guide

4
Lowes.com
ASSEMBLY INSTRUCTIONS
2. Place the faucet (A) through the mounting holes on
the sink.
Note: If the sink surface is uneven, use silicone
sealant (not included) to create a watertight seal.
From under the sink, slide the mounting brackets (B)
onto the threaded bolts on the faucet (A) and secure
with mounting nuts (C).
Note: Tighten mounting nuts until snug. Do not
overtighten.
2
A
B
C
3. Connect a 1/2 in. IPS faucet connector or coupling nuts
(not included) with 3/8 in. O.D. ball-nose risers (not
included) to the water supplies underneath the sink
using wrenches (not included).
Note: Refer to the local plumbing codes for permissible
types of water supply connectors.
3
4. Before tightening the faucet connector to the
water supply, apply a second wrench to the
tube from moving or twisting when tightening
the faucet connector. Do not overtighten.
4