13-in 2-Pack Bronze Traditional Flush Mount Light

Lowes.com

ASSEMBLY INSTRUCTIONS

9. Screw the threaded rod (CC) into coupling in the center

of the ceiling plate (A). Use pliers (not included) to tighten

the hex nut preassembled to the threaded rod (CC).

Note: You may need to adjust the length of the

threaded rod (CC) to ensure there is enough thread

exposed from center hole of the glass bowl (B) to install

the cap (HH).

Hardware Used

Threaded Rod x 1

10. Install two 60 W max. medium-base bulbs (not included)

into the sockets on the ceiling plate (A).

IMPORTANT: Make sure you allow the bulbs and

ceiling plate (A) to cool before you replace the bulbs.

11. Attach glass bowl (B) to ceiling plate (A). Secure with

glass grommet (FF), hex nut (GG), and cap (HH), in

that order.

Repeat Steps 1 - 11 for each xture.

Hardware Used

Glass Grommet x 1

Hex Nut x 1

Cap x 1