Installation Guide

ManualsBrandsProject Source ManualsWall Sconces40628

Lowes.com/portfolio

ITEM #0430587

WALL SCONCE

MODEL #40628

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

Serial Number _________________________ Purchase Date _________________________

ATTACH YOUR RECEIPT HERE

EB1364

Portfolio® is a registered trademark

Summary of content (7 pages)

PAGE 1
ITEM #0430587 WALL SCONCE MODEL #40628 Portfolio® is a registered trademark of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number _________________________ Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. EB1364 1 Lowes.
PAGE 2
PACKAGE CONTENTS A PART A B C C B DESCRIPTION Fixture Body Glass Shade Mounting Bracket QUANTITY 1 1 1 HARDWARE CONTENTS (shown actual size) AA DD BB CC Mounting Screw Wire Connector Bracket Screw Qty. 3 Qty. 2 Qty. 2 2 Lowes.
PAGE 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. WARNING: • Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling parts. • Account for small parts and destroy packing material, as these may be hazardous to children. • Use flashlight or alternate light source to light work area during installation. • Assistance may be required to support fixture during installation.
PAGE 4
1. 1 1 Shut off power at the circuit breaker or fuse panel before removing the old fixture. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Remove the old fixture. To better assist you later in the wiring process, consider making a sketch of how the fixture is wired before you remove it. 2 ASSEMBLY INSTRUCTIONS 1. Attach the mounting bracket (C) to the electrical box (not included) with the two bracket screws (CC).
PAGE 5
DANGER: For safety and proper operation, the fixture must be properly grounded. If you are unfamiliar with the methods of properly grounding the fixture, consult a qualified electrician. 2. A green or bare copper ground wire is preattached to the fixture body (A). If the electrical box has a green or bare copper grounding wire inside, the bare end of the fixture grounding wire must be secured to the green grounding wire inside the electrical box using one of the wire connectors (BB).
PAGE 6
5. Locate the elongated keyhole slots on the fixture body (A) on each side of the pre-installed LED light. The slots are arranged to align with most electrical boxes’ mounting holes. 5 A 6. Position the fixture body (A) over the electrical box and line up the slots in the fixture body (A) with the slots in the mounting bracket. Hold in place and secure with mounting screws (AA). 6 Hardware Used AA Mounting screw x2 A 7.
PAGE 7
CARE AND MAINTENANCE Important Shut off the main power supply before you begin any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring. TROUBLESHOOTING PROBLEM The fixture doesn’t light. The fuse blows or circuit breaker trips when light is turned on. POSSIBLE CAUSE 1. The power is off or the fuse is blown.