Installation Guide

ASSEMBLY INSTRUCTIONS (per xture)

5. Place ceiling plate (A) over outlet box. Position heads of

the mounting screws (CC) to protrude through the large

ends of key holes on the ceiling plate (A). Twist ceiling

plate (A) until heads of mounting screws (CC) slide into

narrow end of key holes. Tighten mounting screws (CC)

to secure ceiling plate (A) rmly to the ceiling.

6. Thread nipple (EE) into coupling (B), then use the

preassembled hex nut on nipple to tighten connection

using pliers.

Note: You may need to adjust the length of the the

threaded nipple (EE) to assure there is enough thread

exposed from center hole of the glass to install the cap

(HH).

8. Attach glass shade (D) to ceiling plate (A). Secure with

glass grommet (FF), hex nut (GG), cap (HH), in that

order.

7. Install two 60-watt or less medium-base bulbs (not

included) into socket (C).

Hardware Used

Mounting Screw x 2