Installation Guide

6
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the nish and void your warranty.
1. To create a moderate water temperature, turn both
handles (1.1) open. Slight adjustments of either handle
(1.1) will cause the water temperature to increase or
decrease.
7. After installation is completed, remove aerator. Turn on
water supply and allow both hot and cold water to run
for at least one minute each. While water is running,
check for leaks. Tighten nuts slightly to stop minor leaks.
If problems persist, refer to troubleshooting chart.
Replace aerator.
7
1
1.1
ASSEMBLY INSTRUCTIONS
Lowes.com