Installation Guide

PACKAGE CONTENTS
SAFETY INFORMATION
CAUTION
• For use with “hbt” series track only.
• Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not
sufficient to prevent electrical shock.
• Do not exceed recommended wattage.
• Save these instructions and refer to them when additions or changes to the track configuration
are made.
• To avoid risk of electric shock or fire, do not modify this lamp; if any modification is made it may
render the product unsafe.
AA
2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5 ~ 6 minutes.
Tools Required for Assembly (not included): Ladder, Safety Goggles
A
B
C
D
Socket (Preassembled to
Track Head Assembly (A))
1B
Track Head Assembly 1A
QUANTITY
DESCRIPTIONPART
1bluBC
Spring (Preassembled to
Track Head Assembly (A))
1D
QUANTITY
DESCRIPTIONPART
Lowes.com