Instructions / Assembly

www.cfpwood.com
800.637.1609
HDTV Stand - Instructions continued
• Use this panel as a template to router
out or cut the arc on the remaining Sup-
port Panels. Note direction of rabbets. See
Figure F.
• Note:Center Support Panel does not
get a Rabbet groove. It is 1/4” smaller than
Left and Right Supports to allow for the
back panel. Align panels to the front edge
when transferring the arc cutline. See Figure
G.
Figure H: Left and Right Support
Dowel Holes (x2)
PAGE 5 ≥
continuEd on nExt PAGE
PLEASE READ AND FOLLOW
ALL SAFETY PRECAUTIONS
NOTED ON PAGE 11.
Columbia Forest Products is
North America’s largest manu-
facturer of hardwood plywood
and hardwood veneer, a leader
in sustainable forestry, and
innovator of soy-based
formaldehyde-free PureBond®
technology.
EASY SPECIAL ORDER*:
Stock items are available at
most Home Depot stores.
Don’t see what you need on
the shelves? Ask the As-
sociates at the ProDesk for
assistance to order anything
you need: species like Cherry,
Walnut, Maple or even exotics.
Need a special thickness or an
MDF or particleboard core? We
can get it for you. As little as
1 sheet, shipped right to the
store. (Ask the ProDesk Asso-
ciate for lead times and pricing
information.
*At this time, PureBond® plywood is not
stocked or offered through special order in The
Home Depot stores in AZ, CO, ID, NM, NV, OR,
UT, or WA.
Figure F:
Support Panels
•Drill ¼” dowel holes in top edges
of all 3 Support Panels (make sure
they align with holes drilled in top
panel). See Figures H and I.
Figure G: Center Support Panel
Figure I: Center Support Dowel Holes
• Drill Pocket Holes in Top &
Bottom Shelves. See Figure J.
Figure J: Top and Bottom Shelves (x2)