User Manual

(Settings) accesses the Settings menu for this camera.

Camera view shows you the image from your WiFi camera. Pan and tilt the camera by

swiping on the screen left/right or up/down. Zoom the camera by pinching the screen

where you want to zoom. Tap the screen to see these controls:

(Micro-SD Card) accesses any content stored on the camera’s Micro-SD Card (not

included).

(Record) starts/stops recording video. The video le is saved to your smartphone

or tablet.

(Pan/Tilt) starts panning or tilting the camera.

(HD-SD Select) lets you switch between high- and standard-denition video on the

view screen.

(Multi-Camera View) lets you see multiple cameras at once on a single screen (if

you’ve set up multiple cameras).

SNAPSHOT

(Snapshot) takes a still photo of the camera video. The snapshot le is saved to your

smartphone or tablet.

TALK

(Speak) lets you speak through this camera’s built-in speaker. Press and hold this

icon to start speaking.

SOUND O N

(Sound) turns the sound from the camera on and off.

USING THE CAMERA AND APP

Now that you’ve set up the camera, you’re all set to start using it to watch and interact with your little one

through the Smart Camera App!

+ Make sure your phone or tablet is connected to the WiFi network you want to use.

+ Make sure the camera is getting a good signal from your WiFi router. See page 3 for more information.

+ Test your WiFi network with other devices to make sure its working.

+ Double check that you’ve entered the correct password for your WiFi network in the Project Nursery App.

+ Make sure your router is broadcasting its SSID (name). The Project Nursery camera does not support hidden SSIDs.

+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery camera does not support 5GHz WiFi.

+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method.

+ Make sure that there is no MAC ﬁlter on router or add MAC address to router whitelist.

+ Reset the camera to set up connection again. Press and hold SET button on the bottom of the camera for 10

seconds. The camera gives a long beep when it is fully reset.

Connection Troubleshooting

For additional assistance, please call 1-844-393-7338.

Getting Started

Nursery

31° C

2017/04/21 11:45AM

Sound

Snapshot

Speak

68ºF