User Manual

7
Getting Started
The App will ask you to press the SET button on the bottom of
the camera and enter the name (WIFI SSID) and password of
your WiFi network.
Find the SET button on the bottom of your WiFi camera. Press it
for one second (until the camera gives an audio signal).
Enter the name (WIFI SSID) and password for your home WiFi
network in the App.
IMPORTANT: Double check your network name and password—
these must be correct to work with the App!
Once you’ve finished entering your network name and password,
press the Next step button on the App screen. The indicator light
on the back of the camera starts flashing—the camera is trying to
join your WiFi network.
Once the camera has successfully connected to your WiFi
network, you’ll see the Success screen in the App and the
indicator light on the back of the camera will turn green.
Congratulations—you’ve just set up your first camera!
IMPORTANT: If your camera does not connect, follow the
instructions in the App to troubleshoot.
IMPORTANT: If you have a dual-band router that uses dierent
networks for the two bands, make sure the WiFi signal you use
for the camera is 2.4GHz, not 5GHz!
Problems connecting?
If the Add new camera with WiFi method doesn’t
work, try the Add new camera with QR code method.
Choose Add Camera, then Add new camera with QR
code and follow the on-screen directions.
Add camera
Camera list
Nursery
Choose the camera from the home screen
Press the part of the home screen showing the camera you set
up in order to choose this camera.
The Camera View screen is your gateway to total control of your
WiFi camera from virtually anywhere.
If you’re having trouble setting up your camera: See the
connection troubleshooting section on the next page.
Nursery
31°C
2017/04/21 11:45AM
Sound
Snapshot
Speak
HD
68ºF