User Manual

3
Plus accessory:
(1) Power adapter
with attached cord
GETTING STARTED
STEP 2: PLACE THE CAMERA
Position the camera
Find a location for the camera that gives you the best view
of your baby in his or her crib. Place the camera on a flat
surface, like a dresser or shelf, or mount the camera to a
wall using the keyhole slots on its bottom (see the mounting
template included in this package).
Test your WiFi signal
Your Project Nursery Smart Baby WiFi Camera needs a
strong enough signal from your WiFi router to send its
video signal. Here’s how to test for signal strength.
First, go to where you want to put the camera. Make sure
your smartphone or other portable wireless device is
connected to the WiFi network you want to test. Then look
at the WiFi icon on your device screen to see the strength
of the connection.
For best results, look for a location with at least 50%
strength to use the WiFi camera.
IMPORTANT: NEVER place the camera or cords of any
kind inside the crib. NEVER place the camera or cords
within reach of the baby.
IMPORTANT: If you have a dual-band router that uses
different networks for the two bands, make sure the
WiFi signal you use for the camera is 2.4GHz, not 5GHz!
Getting Started
Continues on next page...