User Manual

21
Camera time check
The camera’s internal clock might need to be periodically
synchronized with your phone’s clock. If you notice the two times
don’t match, choose Camera time check in the App’s Settings menu,
and follow the directions on the page that appears. The App will
sync the current camera’s clock with your phone or tablet’s clock.
Everyday use
Everyday use
Delete Camera
If you’ve tried all of the troubleshooting solutions to solve a problem,
and nothing seems to work, you might need to reset the camera
and App to their factory settings and start setup again. WARNING:
Delete camera erases all of your custom settings. You will have to
set up the camera from scratch.
Motion detection
Sound detection
Recording time
30S 60S 90S OFF
Lullabies
Alexa
Temperature alarm
Settings
Video Privacy Mode
Camera Time Check
Rotate video 180 degrees
Night vision
Share with friends
Camera information
Delete camera
Motion detection
Sound detection
Recording time
30S 60S 90S OFF
Lullabies
Alexa
Temperature alarm
Settings
Video Privacy Mode
Camera Time Check
Rotate video 180 degrees
Night vision
Share with friends
Camera information
Delete camera
Motion detection
Sound detection
Recording time
30S 60S 90S OFF
Lullabies
Alexa
Temperature alarm
Settings
Video Privacy Mode
Camera Time Check
Rotate video 180 degrees
Night vision
Share with friends
Camera information
Delete camera
Camera information
The Camera information screen gives you details about the currently
selected camera, including the amount of memory left on the micro-
SD card if you have one installed. This menu option also lets you
update the firmware in the active camera.
Format SD card
The Format SD card button in the Camera info screen lets you
format a micro-SD card before you use it for the first time.
To format a micro-SD card: Insert the card into the WiFi camera’s
micro-SD card slot. Then press the Format SD card button in the
Camera info page.
Update camera
The System firmware option in the Camera info screen shows if
camera updates are available (a red dot appears) and lets you apply
them.
To update a camera: Check if there is a red dot next to System
firmware. If there is, press this option and follow the on-screen
instructions.