User Manual

19
Everyday use
Everyday use
Auto-record time
You can set up the camera so that it automatically records a certain
amount of video when the camera detects a motion or sound alert.
To set up an auto-record time: In the Settings menu, press the
amount of Recording time you want (in seconds) when a motion or
sound alert is triggered: 30s, 60s, or 90s (or OFF for none).
Temperature alarm
These alerts tell you when your baby’s room is too hot or too cold.
1 In the Settings menu, press Temperature alarm.
2 In the Temperature alarm menu, press Edit at the top of the
screen to change the settings.
To change from degrees Fahrenheit to Celsius: Press the C.
To set a high temperature alert: Press the switch next to High
temperature alert. Then set the temperature you want for the
high temperature alert.
To set a low temperature alert: Press the switch next to Low
temperature alert. Then set the temperature you want for the
high temperature alert.
If the temperature in your baby’s room goes beyond the limit(s) you
set, you will get a push notification on your phone or tablet.
IMPORTANT: You must have a micro
SD card (not included) installed in your
camera to use this feature.
Motion detection
Sound detection
Recording time
30S 60S 90S OFF
Lullabies
Alexa
Temperature alarm
Settings
Video Privacy Mode
Camera Time Check
Rotate video 180 degrees
Night vision
Share with friends
Camera information
Delete camera
Motion detection
Sound detection
Recording time
30S 60S 90S OFF
Lullabies
Alexa
Temperature alarm
Settings
Video Privacy Mode
Camera Time Check
Rotate video 180 degrees
Night vision
Share with friends
Camera information
Delete camera