Quick Start Guide

8
The App will ask you to press the SET button on the
bottom of the camera and enter the name (WIFI SSID)
and password of your WiFi network.
Find the SET button on the bottom of your WiFi camera.
Press it for one second (until the camera gives an audio
signal).
Enter the name (WIFI SSID) and password for your home
WiFi network in the App.
IMPORTANT: Double check your network name and
password—these must be correct to work with the App!
Once you’ve nished entering your network name and
password, press the Next step button on the App screen.
The indicator light on the back of the camera starts
ashing—the camera is trying to join your WiFi network.
Once the camera has successfully connected to your WiFi
network, you’ll see the Success screen in the App and the
indicator light on the back of the camera will turn green.
Congratulations—you’ve just set up your first camera!
IMPORTANT: If your camera does not connect, follow the
instructions in the App to troubleshoot.
Congratulations!
Camera successfully added!
Configure WiFi
STEP 3: SET UP THE CAMERA
AND APP
(continued)
IMPORTANT: If you have a dual-band router that uses
different networks for the two bands, make sure the
WiFi signal you use for the camera is 2.4GHz, not 5GHz!
Problems connecting?
If the Add new camera with WiFi method doesn’t
work, try the Add new camera with QR code method.
Choose Add Camera, then Add new camera with QR
code and follow the on-screen directions.