Quick Start Guide

7
Pair the Project Nursery camera with the App
Make sure the Project Nursery Smart Camera App is open
on your phone or tablet. Also make sure that your phone or
tablet is connected to your WiFi network.
In the App’s home screen, press the Add camera button at the
bottom of the screen.
NOTE: Make sure your camera is on! If you haven’t already
turned it on, press the Power button on the right side of the
camera (the camera’s LED lights up).
The next screen in the App lets you name the camera you’re
setting up and prompts you to scan the QR code on the
bottom of the camera.
To name the camera you’re setting up: Press in the Camera
name eld and enter the name you want to use. Hint: Use a
name that’s easy for Alexa to recognize with voice commands,
like “nursery.”
To scan the QR code on the camera: Find the QR code on
the bottom of the camera. Position your smartphone or tablet
so that its camera can scan this QR code. Then press where
indicated in the App to scan the QR code on the bottom of
your camera.
In the next screen, press the Add new camera with WiFi
button.
Continues on next page...
Add new camera with WiFi
Add Camera
Add new camera with QR code
Add camera
Camera list