Quick Start Guide

Plug in the camera

Plug one end of the included power cable into the DC In jack on the

back of the camera.

Plug the other end into the included power adapter. Then plug the

adapter into an outlet or surge protector.

The camera turns on automatically when you plug it in (the indicator

light on its back panel turns solid red).

WARNING

Strangulation Hazard: Children have STRANGLED in cords. Keep this

cord out of the reach of children (more than 3ft (0.9m) away). Never

use extension cords with AC Adapters. Only use the AC Adapters

provided.

IMPORTANT: Make sure you carefully remove the protective lm

covering the camera’s face and lens before you continue setup.