Quick Start Guide

+ Make sure your phone or tablet is connected to the WiFi network you want to use.

+ Make sure the camera is getting a good signal from your WiFi router. See step 3 for more information.

+ Test your WiFi network with other devices to make sure its working.

+ Double check that you’ve entered the correct password for your WiFi network in the Project Nursery App.

+ Make sure your router is broadcasting its SSID (name). The Project Nursery camera does not support hidden

SSIDs.

+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery camera does not support 5GHz WiFi.

+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method.

+ Make sure that there is no MAC lter on router or add MAC address to router whitelist.

+ Reset the camera to set up connection again. Press and hold SET button on the bottom of the camera for 10

seconds. The camera gives a long beep when it is fully reset.

Connection Troubleshooting

For additional assistance, please call 1-844-393-7338.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its afliates.

The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other brands, logos and

product names are trademarks or registered trademarks of their respective owners. Product specications subject to change

without notice. Product may vary from that shown.