Quick Start Guide

USING THE TIMER
The timer shuts the lights, sound, and projector off
automatically after a set amount of time.
To set the timer: Press the
button
on the front of the Dreamweaver. The
minutes indicator on the front of the
Dreamweaver shows the amount of
time on the timer: 15, 30, 45, or 60
minutes.
Press
to cycle through these
options or turn the timer off.
USING THE NIGHTLIGHT
Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
Dreamweaver Shine, top
CHANGING THE PROJECTOR IMAGES
The Dreamweaver Shine offers three sets of images.
To change to a different image set:
Make sure the projector is off. Gently
twist the lid on the top of the projector
and lift it off.
On the bottom of the projector lid,
there’s a white image wheel with the
three sets of images. Grab the outside
edges of the wheel and gently rotate
them to the left or right until you feel a
click. (If you can’t go in one direction,
try the other direction). Each click is a
different image set.
Hold the projector lid up to a light
to see which set you’re on. When
you’ve found the one you want, place
the projector lid back on top of the
projector and twist it back into place.
Image wheel
(on the underside of
the projector lid)
Dreamweaver Shine,
front
The Dreamweaver Shine offers two
rey light modes.
To turn the light on, change light
modes, and turn it off again: Press
the
button on the front of the
projector.
Dreamweaver Shine,
front
Quick Start Guide
©2021 Voxx Accessories Corp.
PNJ20 QSG 00
Dreamweaver Shine
Sound Soothing Projector