Installation Instructions

ManualsBrandsProHT ManualsElectricalFixed DVD Player Wall Mount

INSTALLATION MANUAL

ISSUED: APR. 2013

DVD Wall Mount

05341

8kgx2

(17.6lbsx2)

RATED

8kgx2

(17.6lbsx2)

RATED

CAUTIO N: DO NOT EXCEED

RATED LISTED WEIGHT. SERIOUS

INJURY OR PROPERTY DAMAGE

MAY OCCUR!

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months).

• Please contact your distributor if you have any questions.

For any help, pls dial our Toll Free number: 1-800-378-1951

Summary of content (4 pages)

PAGE 1
INSTALLATION MANUAL DVD Wall Mount Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions. 05341 8kgx2 (17.6lbsx2) RATED CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! For any help, pls dial our Toll Free number: 1-800-378-1951 7 ISSUED: APR.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, contact the distributor for a replacement. WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
PAGE 3
1b. For Solid Brick and Concrete Mounting 1a. For Wood Stud Wall Mounting 55mm 50mm ((2") 2.2") (2.2") 60mm 55mm ((2.2") 2.4") (2.4") ø 4mm (ø 5/32") 1 ø 8mm (ø 5/16") 2 1 Find and mark the exact location of mounting holes. Mark the exact location of mounting holes. 3 2 Drill pilot holes Drill pilot holes √ X X X P-B √ P-A X X P-A Screw the wall plate onto the wall Screw the wall plate onto the wall WARNING • Make sure that mounting screws are anchored into the center of the studs.
PAGE 4
. Installing the Glass Shelves 2.Installing the Glass Holders P-F P-F P-C B D 3mm P-C P-D Tighten screws to allow for 3mm spacing. 3. Installing the Glass Holders Insert the glass holders at a desired position along the wall plate rail. P-C P-F Attach the glass shelves to the glass holders using the screws and the plastic bushes. Tighten all screws but do not over tighten. Tighten all screws to secure the glass holders. 5.