Installation Instructions

ManualsBrandsProHT ManualsElectricalFixed Flat TV Wall Mount for 37" - 70" Screens

INSTALLATION MANUAL

Fixed Wall Mount

ISSUED: JUL.2014

05325

200x200/300x300

400x200/400x400

600x400

70"

MAX

75kg

(165lbs)

RATED

75kg

(165lbs)

RATED

CAU T ION: DO NOT EXCEED

RATED LISTED WEIGHT. SERIOUS

INJURY OR PROPERTY DAMAGE

MAY OCCUR!

For any help, pls dial our Toll Free number: 1-800-378-1951

Summary of content (4 pages)

PAGE 1
INSTALLATION MANUAL Fixed Wall Mount CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 05325 200x200/300x300 400x200/400x400 600x400 70" MAX For any help, pls dial our Toll Free number: 1-800-378-1951 75kg (165lbs) RATED ISSUED: JUL.
PAGE 2
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
PAGE 3
1a. For Wood Stud Wall Mounting 1b. For Solid Brick and Concrete Mounting 50mm (2") ((2" 2")) 55mm 50mm (2") ((2.2") 2") ø 6mm (ø 1/4") ø 10mm (ø 3/8" ) 1 1 Find and mark the exact location of mounting holes 2 Mark the exact location of mounting holes 2 3 Drill pilot holes Drill pilot holes X √ X X W-B √ X X W-C W-A W-C W-A Screw the wall plate onto the wall Stud Model Screw the wall plate onto the wall 406mm 450mm 600mm 610mm (16") (17.7") (23.
PAGE 4
2. Installing the Adapter Brackets 3. Hanging the Display onto the Wall Plate 2-1 For Flat Back Screens wall TV wall TV TV M-A M-B M-C M-F Bolt 2-2 For Recessed Back Screens or to Access A/V Inputs Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Position the adapter brackets as close as possible to the center of the display. · Screw the adapter brackets onto the display. Tighten all screws but do not over tighten.